Polyurethane Systems for building and industry

How to carry out polyurethane reception

Since November 2014, it is mandatory to present the CE Marking and Performance Declaration of polyurethane systems:

Read more

Optimum thickness for polyurethane: application conditions

The high insulating capacity of polyurethane is not achieved in construction with any other commonly used insulating materials. This special characteristic is due to the structure of small cells formed by the foam and to the composition of the insulating gas...

Read more

Appropriate proportions in the mixture of polyurethane components

In other articles, we have already analyzed how polyurethane is formed and used as an insulation system or to manufacture some parts, among other applications. The mixture of the two components, polyol and isocyanate, which are liquids at room temperature, produces...

Read more

Polyurethane adhesion according to application surface

Projected polyurethane presents a magnificent adhesion on consistent, clean and dry substrates and, in general, to all the materials used in building. It should not be forgotten that polyurethane foam was discovered during a research on a kind of glue.

Read more

Projected polyurethane insulation for floors: Phono Spray S-907

The floor slabs are elements to be taken into account in acoustic solutions, as a room is usually delimited by two of them: the upper and the lower one. Projected polyurethane systems are an optimal material to isolate slabs against airborne or impact noise, both in...

Read more

Injection moulded polyurethane insulation for facades: Phono Spray I-905

Injected polyurethane is an ideal material for thermo-acoustic renovations of façades and dividing walls between dwellings, since it does not require large machinery for its installation and it is not necessary to demolish constructive elements. When injecting...

Read more
1 2 3 4

FEATURED POST

Phono Spray I-905

Injection moulded polyurethane insulation for facades: Phono Spray I-905

Injected polyurethane is an ideal material for thermo-acoustic renovations of façades and dividing walls between dwellings, since it does not require large machinery for its installation and it is not necessary to demolish constructive elements.

Read more

MOST VIEWED ARTICLES

SUBSCRIBE TO OUR BLOG

More about radon
ther