Polyurethane Systems for building and industry

Fire resistant polyurethane insulation Polyuretan Spray RF-351-C

Polyurethane systems are fire-safe and need to be classified according to their end-use application. This allows us to have true information and as close as possible to their real behaviour in case of fire. The end-use application takes into account joints, fixings, coatings and protections, so that depending on these, there may be different classifications for the same product.

Synthesia Internacional's Polyuretan Spray RF-351-C is a polyurethane system designed to improve both the thermal insulation of homes, while fulfilling the requirements of the corresponding regulations, and industrial buildings, ships and chambers.

Poliuretano resistente fuego Poliuretan Spray RF-351-C 1.jpeg

 

El sistema de poliuretano Poliuretan Spray RF-351-C

Poliuretan Spray RF 351-C is a two-component polyurethane system, polyol and
isocyanate, containing HFC’s and formulated to obtain closed-cell rigid foams to be sprayedin-place for thermal insulation.

Poliuretan Spray RF 351-C system has been awarded with the AENOR N Certificate to product quality for thermal insulation materials and their use in building and reaction to fire EuroClass Cs3d0.

There are many relevant advantages in its use, for example:

  • Suppression of thermal bridges.
  • Good adhesion to the substrate.
  • Ease of mobility, not having to transport or store bulky products as in the case of other insulation materials.

Characteristics

Free density

34±3 g/l

Apparent Core Density

35-45 kg/m3

Closed Cell Content

≥90%

Bending Strenght (Deflection)

2’20 kg/cm2 (15 mm)

Reaction to fire (60 mm)

C-s3d0

Water absorption (Wp)

≤0’20 kg/m2

Water vapour resistance factor (µ)

≥60

Thermal resistance and termal conductivity

25-60 mm: 0,028 W/mK

 

Conditions of uses Poliuretan Spray RF-351-C

Poliuretan Spray RF 351-C system is applied by spraying with a high pressure equipment fitted with heating, with a mixing ration of 1:1 in volume. The main applications are the thermal insulation of building closings, houses (partitioning), industrial buildings, roofs, farms, ships, tanks and cool stores.

The recommended temperature in hoses is 30 to 50ºC, depending on the weather conditions. The
minimum recommended substrate temperature during spraying is 5ºC.

The surfaces must be clean, dry and free of dust and grease to ensure good adherence of the foam to the substrate; if the substrate is metallic it must also be free of oxide and rust. However, a suitable primer could be needed to guarantee good adherence on metal substrates.

The foam performance is influenced by a great number of factors which are listed below:

  • Weather conditions: temperature and humidity of the atmosphere and the substrate surface, as well
    as other environmental factors (wind, etc.)
  • Adjustment of the machinery, a proper ratio.
  • Application type: vertical, horizontal, roofs.
  • Application process: coat thickness, varnish application

Poliuretano resistente fuego Poliuretan Spray RF-351-C 2.jpg

 

Fire reaction test Poliuretan Spray RF-351-C

Characteristics

Units

RF-351-C

Fire reaction

50 mm with 7 mm naturvex support

Class

M1

Fire resistance

Euroclass SBI

Euroclass

C-s3d0

 

 DOWNLOAD. High fire resistance systems data sheets

Related posts

Comments

FEATURED POST

Phono Spray I-905

Injection moulded polyurethane insulation for facades: Phono Spray I-905

Injected polyurethane is an ideal material for thermo-acoustic renovations of façades and dividing walls between dwellings, since it does not require large machinery for its installation and it is not necessary to demolish constructive elements.

Read more

MOST VIEWED ARTICLES

SUBSCRIBE TO OUR BLOG

More about radon
ther
Budma 2018, Poznan Poland